MURR穆?tīng)?/h3>
EMC-Filter產品詳細信息:
MEF EMC-Filter 1-phase 2-stage I:250 V AC/300 V DC 穆?tīng)?span style="font-family:Times New Roman;">MURR線路濾波器價格哪家好,比一比上海銳譽,就知道,產地進口,更少中間環節哦。
MEF EMC-Filter 1-phase 2-stage I:250 V AC/300 V DC參數:
電流:3 A
DIN導軌安裝
MEF EMC-Filter 1-phase 2-stage I:3A U:250 VAC/300 VDC snap on
Art.-No. 10470
技術資料
工作電壓大。 250 V AC/300 V DC
工作頻率50 ... 60赫茲
消費在250 V AC大。 5毫安
過載電流18 × (IN t)大。 0.5毫秒; 1.5 × (IN t)大。 1分鐘。 (每小時1 × )
連接橫截面0.2 ... 6 mm2的單核心( AWG 24 ... 9 ),0.2 ... 4平方毫米多核心( AWG 24 ... 11 )
一般資料
25/085/21氣候類別( EN 60068-1 )
測試隔離電壓L - N的: 2.7千伏直流, 2秒,L - L: 2.1千伏直流, 2秒( EN 60939-2 )
連接螺釘連接,觸摸保護
安裝方式DIN導軌安裝TH35 ( EN 60715 )
描述
功能說明
單相2級EMC濾波器MEF 1/2的使用范圍為0.1 ... 30 MHz到抑制電纜進行干擾的電源和控制電纜。 ( :接地連接< 10厘米建議)和大可能的直徑好過濾器的性能是通過使用短的連接線來實現。在EMC濾波器工作雙向(雙向) 。該過濾器是為要求苛刻的應用。該過濾器是專為使用固定模塊的使用。過濾器中的一個步驟始終是不對稱的干擾(磁補償抑制)的抑制。第二個步驟是,依賴于應用程序?yàn)閷?duì)稱或不對稱的干擾。
應用
不對稱的干擾: - 單位與高開關頻率和重復, - 開關模式電源模塊 - 直流電源 - 變壓器前, - 用于變頻器
商業數據
凈重450
重量單位克
基本單元件。
海關稅則號85363010
單位(片) 1
低訂貨量(件) 1
Current: 3 A
DIN-rail mountable
MEF EMC-Filter 1-phase 2-stage I:3A U:250 VAC/300 VDC snap on
Art.-No. 10470
Technical Data
Operating voltage max. 250 V AC/300 V DC
Operating frequency 50...60 Hz
Consumption at 250 V AC max. 5 mA
Overload current 18 × (IN t) max. 0.5 ms; 1.5 × (IN t) max. 1 min. (1 × per hour)
Connection cross section 0.2...6 mm2 single core (AWG 24...9); 0.2...4 mm2 multiple core (AWG 24...11)
General data
Climatic category 25/085/21 (EN 60068-1)
Test isolation voltage L - N: 2.7 kV DC, 2 s; L - L: 2.1 kV DC, 2 s (EN 60939-2)
Connection Screw connection, touch protected
Mounting method DIN-rail mountable TH35 (EN 60715)
Description
Functional description
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
Application
asymmetrical interferences: - units with high switching frequency and repetition, - switch mode P.S.U.s, - in DC mains, - in front of transformers, - for frequency inverters
Commercial data
Net weight 450
Weight unit Gram
Basic unit pc.
Customs tariff number 85363010
Unit (piece) 1
Minimum order quantity (piece) 1
MEF EMC-Filter 1-phase 2-stage I:250 V AC/300 V DC 穆?tīng)?span style="font-family:Times New Roman;">MURR線路濾波器價格哪家好,比一比上海銳譽,就知道,產地進口,更少中間環節哦。
MEF EMC-Filter 1-phase 2-stage I:250 V AC/300 V DC參數:
電流:3 A
DIN導軌安裝
MEF EMC-Filter 1-phase 2-stage I:3A U:250 VAC/300 VDC snap on
Art.-No. 10470
技術資料
工作電壓大。 250 V AC/300 V DC
工作頻率50 ... 60赫茲
消費在250 V AC大。 5毫安
過載電流18 × (IN t)大。 0.5毫秒; 1.5 × (IN t)大。 1分鐘。 (每小時1 × )
連接橫截面0.2 ... 6 mm2的單核心( AWG 24 ... 9 ),0.2 ... 4平方毫米多核心( AWG 24 ... 11 )
一般資料
25/085/21氣候類別( EN 60068-1 )
測試隔離電壓L - N的: 2.7千伏直流, 2秒,L - L: 2.1千伏直流, 2秒( EN 60939-2 )
連接螺釘連接,觸摸保護
安裝方式DIN導軌安裝TH35 ( EN 60715 )
描述
功能說明
單相2級EMC濾波器MEF 1/2的使用范圍為0.1 ... 30 MHz到抑制電纜進行干擾的電源和控制電纜。 ( :接地連接< 10厘米建議)和大可能的直徑好過濾器的性能是通過使用短的連接線來實現。在EMC濾波器工作雙向(雙向) 。該過濾器是為要求苛刻的應用。該過濾器是專為使用固定模塊的使用。過濾器中的一個步驟始終是不對稱的干擾(磁補償抑制)的抑制。第二個步驟是,依賴于應用程序?yàn)閷?duì)稱或不對稱的干擾。
應用
不對稱的干擾: - 單位與高開關頻率和重復, - 開關模式電源模塊 - 直流電源 - 變壓器前, - 用于變頻器
商業數據
凈重450
重量單位克
基本單元件。
海關稅則號85363010
單位(片) 1
低訂貨量(件) 1
Current: 3 A
DIN-rail mountable
MEF EMC-Filter 1-phase 2-stage I:3A U:250 VAC/300 VDC snap on
Art.-No. 10470
Technical Data
Operating voltage max. 250 V AC/300 V DC
Operating frequency 50...60 Hz
Consumption at 250 V AC max. 5 mA
Overload current 18 × (IN t) max. 0.5 ms; 1.5 × (IN t) max. 1 min. (1 × per hour)
Connection cross section 0.2...6 mm2 single core (AWG 24...9); 0.2...4 mm2 multiple core (AWG 24...11)
General data
Climatic category 25/085/21 (EN 60068-1)
Test isolation voltage L - N: 2.7 kV DC, 2 s; L - L: 2.1 kV DC, 2 s (EN 60939-2)
Connection Screw connection, touch protected
Mounting method DIN-rail mountable TH35 (EN 60715)
Description
Functional description
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
Application
asymmetrical interferences: - units with high switching frequency and repetition, - switch mode P.S.U.s, - in DC mains, - in front of transformers, - for frequency inverters
Commercial data
Net weight 450
Weight unit Gram
Basic unit pc.
Customs tariff number 85363010
Unit (piece) 1
Minimum order quantity (piece) 1